Adler & Allan provides a full range of tank services to the fuel, water, chemical, manufacturing, retail forecourts, major refinery and defence sectors.
Our services cover all aspects of tank operation, from installation, testing and ppm including tank gauge, pump and alarm servicing, to inspections in accordance to EEMUA and OFTEC guidelines and planning regulations.
We also carry out protective tank and bund lining, and tank purging, decommissioning and removal and are the UK’s leading emergency responder, providing a 24/7-365 emergency response service Nationwide.
Adler & Allan offers a range of tank services including:
Tank inspection (incl. EEMUA)
Tank bund lining
OFTEC inspection services & compliance
NDT Inspection services & Tank Integrity Testing
Polyurea coatings and linings
24/7 remote leak detection monitoring
Bund surveys and lining
Fuel Polishing and testing
Painting, Decorating and Application of Specialist Coatings.
As an industry leading industrial coatings contractor, we work for many of the world’s foremost utility, chemical and power generation companies. Our expert industrial painting contractors deliver complex projects whilst maintaining robust safe systems of work, technical know-how and achieving specification requirements.
Our painters have the training and experience to work in all types of industrial environments, this means that we can expertly access difficult areas and minimise the time required between maintenance schedules by applying an advanced industrial coating solution, specified by a trusted specialist coatings manufacturer
6 Manor Lane, Shipley, West Yorkshire, BD18 3RD
Storage Tank Inspection EEMUA 159 / 22/ API 653
ALLIANCE INSPECTION provides storage tank integrity inspection as one of our specialist NDT services. We provide a very comprehensive range of techniques for the cleaning and inspection of above ground or below ground storage tanks including GRP. We have numerous technicians qualified to EEMUA 159 / API 653 / API 510 / API 570 and have a wealth of experience gained from many sites across the UK.
Our services include, but are not limited to: NDT – Site Radiography, Ultrasonic Thickness Survey, Magnetic Particle Inspection, Vacuum Box Inspection, Eddy Current , Phased Array, Tube Inspection, Dye Penetrant Inspection and Weld Procedures and Qualifications.
9 OLD MARSH FARM BARNS,
Industrial Coating Services Ltd specialise in surface preparation and application of protective coatings with works undertaken including; Intumescent Coatings, Decorative Painting, Ultra High Water Jetting (UHP), Stone and Brick Cleaning, Graffiti Removal, Graffiti Coatings, Steelwork Repairs, Scaffolding and minor masonry repairs.
Based in the Midlands and operating throughout the UK, ICS supplies a wide range of services to the public sector, energy utilities, highways and rail sectors.
Rolling Mill Road
Innospection Ltd is a provider of advanced and innovative inspection services and solutions for the integrity and lifetime assessment support of onshore and offshore assets. The inspection of storage tanks is supported by the next generation MEC (Magnetic Eddy Current) technology adapted into the advanced MEC-Floorscanners. Innospection’s package for storage tank inspection and integrity management as per the EEMUA 159 / API 653 standards is a cost effective solution with the benefits of the most advanced technology available in the market. Innospection’s certified and competent inspectors deliver robust integrity assessments for our Clients’ peace of mind.
Unit 1, Howemoss Avenue, Kirkhill Industrial Estate, Dyce, AB21 0GP, Aberdeen, United Kingdom
Oceaneering has been providing tank and pipe inspection, consultancy and integrity management services to the UK and global energy market for over 30 years.
Our multi certified personnel have a wealth of technical knowledge, practical experience and access to the latest state of the art integrity software, NDT equipment and inspection technologies.
Oceaneering can offer a comprehensive integrity solution ranging from Non Destructive Testing through to full inspection engineering assessments performed to EEMUA 159, API 653, API570, API510 and BS EN:14015 standards.
Presserv Tank Brigade are a specialist corrosion control contractor. Our focus is extending the life of tank floor bottoms by the mitigation of soil-side corrosion. We utilise the latest vapour corrosion inhibiting technology and techniques for in-service, out-of-service and new build AST’s. We have experience in over 500 tanks globally and can demonstrate a reduction in metal loss to floor plates of between 85% – 95%.
We deliver our services through teams of experienced Corrosion Supervisors and Technicians.
Presserv Tank Brigade will deliver significant reduction in OPEX and CAPEX by reducing repair costs, limiting tank downtime and extending floor life.
Unit 7, Ocean Trade Centre
Altens Industrial Estate
TesTex NDT Ltd. offer specialist inspection services and non-destructive testing across all sectors of industry throughout the UK and Europe.
Our inspection services include, but are not limited to; bulk storage tanks, pressure vessels, pipelines and associated pipework. Employing dedicated teams of multi-skilled level II NDT technicians, EEMUA 159, API 653, API 570 and API 510 inspectors, we are able to offer the client a complete inspection package including recommendations for repair and remaining life assessments.
Our Asset Integrity Management (AIM) department provides clients with an added value inspection service, to help maximise the efficiency and lifespan of their assets through targeted inspections.
Winn & Coales (Denso) Ltd, established in 1883, has been at the forefront of cost-effective, long-term, corrosion prevention, weatherproofing and sealing technology for over 80 years. The Denso® and Archco-Rigidon™ brands provide solutions for exposed steel tanks and tank bases and resistant linings for steel and concrete tanks, pipes and bunded areas.
With parent company Winn & Coales International, currently owning seven subsidiaries worldwide (four of them manufacturing), the company is able to draw upon a wealth of experience in producing its well known quality brands such as Denso®, Archco-Rigidon™, Protal™ and SeaShield™ to deal with corrosion and sealing problems in many difficult environments.
The company’s products are manufactured in the United Kingdom under BS EN ISO 9001:2008 and the BS ISO 14001 Environmental Management systems. In 2013 the company celebrated its 130th Anniversary and in 2010 and again in 2013 it achieved a Queen’s Award for Enterprise: International Trade.
Denso House, Chapel Road, London SE27 0TR